Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #2: Tue Jun  7 19:21:14 CEST 2005
    root@Fragile.neoplus.adsl.tpnet.pl:/usr/obj/usr/src/sys/WRETCHED
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2600+ (1921.04-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory  = 536805376 (511 MB)
avail memory = 511832064 (488 MB)
acpi0: <Nvidia AWRDACPI> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link LNK1> irq 11 on acpi0
pci_link1: <ACPI PCI Link LNK2> irq 12 on acpi0
pci_link2: <ACPI PCI Link LNK3> irq 11 on acpi0
pci_link3: <ACPI PCI Link LNK4> irq 12 on acpi0
pci_link4: <ACPI PCI Link LNK5> on acpi0
pci_link5: <ACPI PCI Link LUBA> irq 12 on acpi0
pci_link6: <ACPI PCI Link LUBB> irq 11 on acpi0
pci_link7: <ACPI PCI Link LMAC> irq 5 on acpi0
pci_link8: <ACPI PCI Link LAPU> on acpi0
pci_link9: <ACPI PCI Link LACI> on acpi0
pci_link10: <ACPI PCI Link LMCI> on acpi0
pci_link11: <ACPI PCI Link LSMB> on acpi0
pci_link12: <ACPI PCI Link LUB2> irq 5 on acpi0
pci_link13: <ACPI PCI Link LFIR> on acpi0
pci_link14: <ACPI PCI Link L3CM> on acpi0
pci_link15: <ACPI PCI Link LIDE> on acpi0
pci_link16: <ACPI PCI Link APC1> irq 16 on acpi0
pci_link17: <ACPI PCI Link APC2> irq 17 on acpi0
pci_link18: <ACPI PCI Link APC3> irq 18 on acpi0
pci_link19: <ACPI PCI Link APC4> irq 19 on acpi0
pci_link20: <ACPI PCI Link APC5> irq 16 on acpi0
pci_link21: <ACPI PCI Link APCF> irq 0 on acpi0
pci_link22: <ACPI PCI Link APCG> irq 0 on acpi0
pci_link23: <ACPI PCI Link APCH> irq 0 on acpi0
pci_link24: <ACPI PCI Link APCI> irq 0 on acpi0
pci_link25: <ACPI PCI Link APCJ> irq 0 on acpi0
pci_link26: <ACPI PCI Link APCK> irq 0 on acpi0
pci_link27: <ACPI PCI Link APCS> irq 23 on acpi0
pci_link28: <ACPI PCI Link APCL> irq 0 on acpi0
pci_link29: <ACPI PCI Link APCM> irq 0 on acpi0
pci_link30: <ACPI PCI Link AP3C> irq 0 on acpi0
pci_link31: <ACPI PCI Link APCZ> irq 0 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <NVIDIA nForce2 AGP Controller> mem 0xc0000000-0xcfffffff at device 0.0 on pci0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe5002000-0xe5002fff irq 12 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe5003000-0xe5003fff irq 11 at device 2.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe5004000-0xe50040ff irq 5 at device 2.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: waiting for BIOS to give up control
usb2: timed out waiting for BIOS
usb2: EHCI version 1.0
usb2: companion controllers, 4 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
pci0: <network, ethernet> at device 4.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, video> at device 6.0 (no driver attached)
emu10kx0: <Creative Audigy 2 ZS [SB0350]> port 0xc000-0xc03f irq 12 at device 7.0 on pci1
pcm0: <EMU10Kx PCM Interface> on emu10kx0
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
fwohci0: <1394 Open Host Controller Interface> mem 0xe4005000-0xe40057ff,0xe4000000-0xe4003fff irq 11 at device 7.2 on pci1
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:02:3c:01:41:00:1e:9e
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:02:3c:00:1e:9e
fwe0: Ethernet address: 02:02:3c:00:1e:9e
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc1, gen=1, CYCLEMASTER mode
firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me)
firewire0: bus manager 1 (me)
rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xe4004000-0xe40040ff irq 12 at device 11.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:04:61:52:d0:5e
atapci0: <SiI 3112 SATA150 controller> port 0xcc00-0xcc07,0xd000-0xd003,0xd400-0xd407,0xd800-0xd803,0xdc00-0xdc0f mem 0xe4006000-0xe40061ff irq 11 at device 12.0 on pci1
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
fwohci1: <Lucent FW322/323> mem 0xe4007000-0xe4007fff irq 12 at device 13.0 on pci1
fwohci1: OHCI version 1.0 (ROM=1)
fwohci1: No. of Isochronous channels is 8.
fwohci1: EUI64 00:04:61:00:00:05:29:d2
fwohci1: Phy 1394a available S400, 3 ports.
fwohci1: Link S400, max_rec 2048 bytes.
firewire1: <IEEE1394(FireWire) bus> on fwohci1
fwe1: <Ethernet over FireWire> on firewire1
if_fwe1: Fake Ethernet address: 02:04:61:05:29:d2
fwe1: Ethernet address: 02:04:61:05:29:d2
fwe1: if_start running deferred for Giant
fwohci1: Initiate bus reset
fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire1: bus manager 0 (me)
atapci1: <nVidia nForce2 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
nvidia0: <GeForce FX 5600> mem 0xe0000000-0xe0ffffff,0xd0000000-0xdfffffff irq 12 at device 0.0 on pci2
nvidia0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
device_attach: fdc0 attach returned 12
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
device_attach: fdc0 attach returned 12
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xd0000-0xd3fff,0xd4000-0xd87ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Logitech USB Receiver, rev 1.10/17.11, addr 2, iclass 3/1
kbd0 at ukbd0
ums0: Logitech USB Receiver, rev 1.10/17.11, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
ulpt0: Hewlett-Packard hp LaserJet 1005 series, rev 1.10/1.20, addr 3, iclass 7/1
ulpt0: using bi-directional mode
uhub3: ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2
uhub3: 4 ports with 4 removable, bus powered
Timecounter "TSC" frequency 1921036786 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDRW <LITE-ON LTR-52327S/QS04> at ata0-master UDMA33
ad1: 76319MB <WDC WD800BB-00DKA0 77.07W77> at ata0-slave UDMA100
acd1: DVDROM <HL-DT-STDVD-ROM GDR8162B/0015> at ata1-master UDMA33
ad4: 114473MB <Seagate ST3120026AS 3.05> at ata2-master SATA150
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/ad1s2a